Overview
Key features
- Suspending polymer holds encapsulated beads evenly
- Brightening, antioxidant positioning
- Ready-to-use melt & pour flakes — simply melt, add actives, colour and fragrance, then pour
- Based on plant-derived surfactants; skin-friendly bars
- Creamy foam with mild cleansing and an excellent skin feel
- Quick release from the mould and reduced batch cycle time
- Cost-effective operation, compatible with a wide range of additives
Technical specifications
| Product code | SP10 |
|---|---|
| Form | Melt & pour flakes |
| Appearance | Flakes |
| Odour | Characteristic (unperfumed) |
| Colour | Pearlised translucent |
| Clarity | Opaque |
| pH (5% Aqueous Solution) | 9.00 – 10.50 |
| Fatty matter (product to comply with either (a) or (b)) | — |
| a) i) Total fatty matter (% by mass, minimum) | 40 |
| a) ii) Synthetic surface active agent (% by mass, minimum) | 4.0 |
| b) Fatty matter from dissolved actives (minimum) | 8.0 |
| Free alkali | 0.05% maximum |
| Melting point | 75 – 80 °C |
| Lather | 200 ml minimum |
Ingredients (INCI / chemical name)
| Sr. | INCI / chemical name | CAS No. |
|---|---|---|
| 01 | Water (Aqua) | 7732-18-5 |
| 02 | Sodium Stearate | 68424-38-4 |
| 03 | Sodium Cocoate | 61789-31-9 |
| 04 | Sodium Laurate | 629-25-4 |
| 05 | Propylene Glycol | 57-55-6 |
| 06 | Sorbitol | 50-70-4 |
| 07 | Glycerin | 56-81-5 |
| 08 | Sodium Lauryl Ether Sulphate | 68891-38-3 |
| 09 | Sodium Lauryl Sulphate | 85586-07-8 |
| 10 | Sodium Chloride | 7647-14-5 |
| 11 | Acrylates Copolymer (suspending polymer) | 25212-88-8 |
| 12 | Encapsulated Vitamin C (Ascorbic Acid) | — |
Active Ingredients
What the actives do for skin
Indicative skin benefits of the key actives in this base. Final claims should be validated against your finished-product testing and local regulations.
Vitamin C
- Potent antioxidant that neutralises free radicals and reduces oxidative stress
- Essential for collagen synthesis — supports elasticity and wound healing
- Promotes skin health and helps reduce signs of ageing
Encapsulation
- Protects the vitamin from oxidation until the moment of use
- Controlled release for steady, gentle delivery
- Attractive visible beads with an elegant feel
Applications
- Brightening and vitamin-infused bars
- Personal care and cosmetic brands
- Private-label and contract manufacturing
- Designer, artisan and gifting soaps
Processing & handling
- Equipment: jacketed mixer (SS 304/316) with anchor/paddle low-RPM stirrer (VFD if available); all contact parts SS 304/316.
- Heating: hot water, steam or hot-oil unit. Mixer must be clean and dry — sanitise with 2% formaldehyde solution if required.
- Add flakes to the mixer. Heat with slow stirring until the soap melts, maintaining temperature below 80 °C.
- Note: heating above 80 °C may turn the product translucent or opaque. Maintain moisture content — add sorbitol / glycerin if necessary.
- Cool the mass to 70 °C. Add colour, fragrance and additives as required (colour as per BIS, Schedule Q preferred; perfume stable at 70–80 °C).
- Transfer the mass to the mould or Schist cooler.
- Stamping: cut and stamp on a manual or automatic stamper in the desired shape, then pack in cartons or shrink wrap.
Packaging & storage
| Packing | Flakes packed in Kraft paper with HDPE liner, 25 kg / 30 kg bags |
|---|---|
| Storage | Clean, dry, well-ventilated room away from heat and direct sunlight, below 30 °C |
| Palletizing | Maximum 8 bags per pallet |
| Shelf life | 12 months (sealed bag) |
| After opening | Consume immediately, or reseal tightly and use within one month |
| Lead time | 5-7 Days |
Safety: Avoid contact with eyes, skin and clothing, and do not swallow. In case of contact with the eyes, rinse immediately with plenty of water and seek medical advice if necessary. Use personal protective equipment (safety goggles, hand gloves, face mask and protective clothing) when handling.
Documents
Source Vitamin C Encapsulated Soap Base in bulk
Share your required quantity and delivery location — we will respond with pricing, MOQ and lead time.
